The Procraft 180  is an outboard boat with a fiberglass hull. It has a beam of 7’7″ and a length of 18′. The net weight is 1720 lbs. Has a 1997 Mercury 150 EFI with a 4 blade Tempest prop, with Hot Foot and Column Trim control. Engine just had lower unit impellar kit installed, lower unit oil changed, new spark plugs, fuel filters. I had the injectors cleaned and Reeds upgraded to Boyseen reeds Last summer, Engine has 135 psi compression on all 6 cylinders. Has  70lb thurst Minn Kota Maxxius foot pedal troll motor. Boat has a Garmin 7  Echomap with side view transducer mounted on the Transom, it already has the latest software uploaded with a ll lakes on waterways in the US. On board battercharges, on is for the dual batteries for troll motor and one is for the engine battery wiht a flushmount 120v weather proof outlet on passenger side for easy plug in. There is 2 rods boxes on the bow, a big storage in the middle, built in ice chest compartment right in the middle. 2 livewells one behind each seat, Aireator and remote drain valve works good, there is 2 storage compartments right behind the livewells. Also is a built in Drybox glove box next to the driver. The Hull is Grey Glittered Fiberglass with Carpet floors, it rides on a pad which allows for shallow water hole shot. This boat has a hole shot of 1.9 second, top speed is 60 mph, best crusing speed with 2 guys, full gear and full 38gal fuel tank. 48-50 mph  turning 4500 rpms.   Single axle Trailer, with bunk slides on the rails. Custom built frame for the boat cover to allow good air flow, boat has always been covered. This a great boat for friends and family, very smooth riding I easily bring my wife and 2 kids and we all ride and fish comfortable out of this boat.   $7500.00  OBO