SOLD Price Reduced. The Boat: 17'-6' Aluminum Skiff made by Gaudet's Aluminum Boats (in Sorento, La) in late 2000. All welded with chined edges, sides are approx 16' tall, the width at top is approx 38', width at bottom is approx 28”. Raised floor with longitudinal rib stiffeners running full length. Extended front deck to put the gas tank in the front. Interior was painted in 2009 with a very expensive 2 part epoxy primer and paint with Non-Slip grit. Bow and Stern Lights were re-wired in 2009 and I also added a 12v DC plug under the bow light. I also added two galvanized cleats onto the transom. Handle is removable but the bench seat is welded in. Electrip bilge pump with through side discharge hose. The Motor: Mud Buddy Longshaft – 6’ model. 2008 Honda 24 HP Electric Start with electric fuel pump. Galvanized longtail frame is a 2000 year model but the Honda engine was replaced in 2008 and has approx 120 hours on it. It has a fuel / water separator mounted to the transom and has an in-line filter at the fuel pump. 6 gallon fuel tank with quick connect.